Unless explicitly noted otherwise, this guide uses 7210 SAS-Dxp to refer to the 7210 SAS-Dxp 12p, 7210 SAS-Dxp 16p, and 7210 SAS-Dxp 24p platforms.
This guide describes system concepts and provides configuration examples to configure the boot option file (BOF) on the following 7210 SAS platforms, operating in one of the modes described in Table: Supported modes of operation and configuration methods. If multiple modes of operation apply, they are explicitly noted in the topic.
7210 SAS-K 2F6C4T
7210 SAS-K 3SFP+ 8C
See 7210 SAS modes of operation for information about the modes of operation supported by the 7210 SAS product family.
Unless explicitly noted otherwise, the phrase ‟Supported on all 7210 SAS platforms as described in this document” is used to indicate that the topic and CLI commands apply to the following 7210 SAS platforms implicitly operating in the specified modes only.
access-uplink mode of operation
7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
network mode of operation
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C