For each damping profile, all parameters must be configured.
The suppress value must be greater than the reuse value (see Figure: Damping example).
Damping can be enabled in the config>router>bgp context on the BGP global, group, and neighbor levels. If damping is enabled, but route policy does not specify a damping profile, the default damping profile will be used. This profile is always present and consists of the following parameters:
|
half-life: |
15 minutes |
|
max-suppress: |
60 minutes |
|
suppress: |
3000 |
|
reuse: |
750 |
*A:cses-A13>config>router>policy-options# info
----------------------------------------------
damping "damptest123"
half-life 15
max-suppress 60
reuse 750
suppress 1000
exit
----------------------------------------------
*A:cses-A13>config>router>policy-options#