isis [isis-instance]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging of IS-IS protocol entities.
Specifies the IS-IS instance.
[no] adjacency [ip-int-name | ip-address | nbr-system-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS adjacency.
The no form of this command disables debugging.
Specifies the IP interface name. An interface name cannot be in the form of an IP address. Interface names can be any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (such as #, $, and spaces), the entire string must be enclosed within double quotes.
Specifies the interface IP address.
[no] cspf
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS CSPF.
The no form of this command disables debugging.
[no] graceful-restart
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS graceful restart.
The no form of this command disables debugging.
interface [ip-int-name | ip-address]
no interface
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for the IS-IS interface.
The no form of this command disables debugging.
Specifies the IP interface name. An interface name cannot be in the form of an IP address. Interface names can be any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (such as #, $, and spaces), the entire string must be enclosed within double quotes.
Specifies the interface IP address.
leak ip-address
no leak
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS leaks.
The no form of this command disables debugging.
Specifies the interface IP address.
[no] lsdb [level-number] [system-id | lsp-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for Link State Database (LSDB).
The no form of this command disables debugging.
[no] misc
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS misc.
The no form of this command disables debugging.
packet [packet-type] [ip-int-name | ip-address] [detail]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS packets.
The no form of this command disables debugging.
Specifies the IP interface name. An interface name cannot be in the form of an IP address. Interface names can be any string up to 32 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (such as #, $, and spaces), the entire string must be enclosed within double quotes.
Specifies the interface IP address.
rtm [ip-address]
no rtm
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for the IS-IS route table manager (RTM).
The no form of this command disables debugging.
Specifies the interface IP address.
[no] spf [level-number] [system-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS SFP.
The no form of this command disables debugging.