events [neighbor ip-address | group name]
no events
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command logs all events changing the state of a BGP peer.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
keepalive [neighbor ip-addr | group name]
no keepalive
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command decodes and logs all sent and received keepalive messages in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
notification [neighbor ip-address | group name]
no notification
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command decodes and logs all sent and received notification messages in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
open [neighbor ip-address | group name]
no open
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command decodes and logs all sent and received open messages in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
[no] outbound-route-filtering
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for all BGP outbound route filtering (ORF) packets. ORF is used to inform a neighbor of targets (using target-list) that it is willing to receive.
packets [neighbor ip-address | group name]
packets
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command decodes and logs all sent and received BGP packets in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
route-refresh [neighbor ip-address | group name]
no route-refresh
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command enables and disables debugging for BGP route-refresh.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
rtm [neighbor ip-address | group name]
no rtm
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command logs RTM changes in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
socket [neighbor ip-address | group name]
no socket
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command logs all TCP socket events to the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
timers [neighbor ip-address | group name]
no timers
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command logs all BGP timer events to the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.
update [neighbor ip-address | group name]
no update
debug>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command decodes and logs all sent and received update messages in the debug log.
Debugs only events affecting the specified BGP neighbor.
Debugs only events affecting the specified peer group and associated neighbors, up to 32 characters.