Route policy statements can be edited to modify, add, or delete parameters. To enter the mode to edit route policies, you must enter the begin keyword at the config>router>policy-options prompt. Other editing commands include:
The commit command saves changes made to route policies during a session.
The abort command discards changes that have been made to route policies during a session.
A:ALA-B>config>router>policy-options>policy-statement# info
----------------------------------------------
description "Level 1"
entry 1
to
neighbor 10.10.10.104
exit
action accept
exit
exit
entry 2
from
protocol ospf
exit
to
protocol ospf
neighbor 10.10.0.91
exit
action accept
exit
exit
entry 4
description "new entry"
from
protocol isis
area 0.0.0.20
exit
action reject
exit
default-action accept
metric set 10
exit
----------------------------------------------
A:ALA-B>config>router>policy-options# info
----------------------------------------------
prefix-list "host"
prefix 10.0.0.0/8 longer
exit
prefix-list "group1"
prefix 239.6.6.8/32 exact
exit
policy-statement "block-igmp"
description "Reject-Reports-From-Specific-Group-And-Host"
entry 1
from
host-ip "host"
exit
action next-entry
exit
exit
entry 2
from
group-address "group1"
exit
action reject
exit
default-action accept
exit
exit
----------------------------------------------
A:ALA-B>config>router>policy-options#