Access egress QoS policy queue override

The following QoS policy queue parameters can be overridden using the configure>port>ethernet>access>egress>queue-override command. For command description details, see the "Port Ethernet QoS commands" section in the 7210 SAS-Mxp, R6, R12, S, Sx, T Interface Configuration Guide:

• adaptation rule

  Specifies the criteria used to compute the operational PIR and CIR values for this queue (min, max, or closest).

• percent rate

  Enables the configuration of queue PIR and CIR as a percentage of the egress port line rate rather that the values set by the rate parameter.

• queue management

  Associates a queue management policy with the queue.

• queue mode

  Sets strict or weighted mode for the queue.

• rate

  Defines the administrative PIR and CIR for the queue.

• weight

  Determines the proportion of available bandwidth that is given to this queue.

See ‟Port Ethernet QoS commands” in the 7210 SAS-Mxp, R6, R12, S, Sx, T Interface Configuration Guide for more information about the queue-override command.