The num-qos-classifiers command allocates meters from the resources allocated toward the qos-sap-ingress pool, from the ingress-internal-tcam resource pool.
MAC, IPv4, and IPv6 criteria do not need to be defined because DSCP classification or dot1p classification is being used.
Use the following syntax to associate an IP DSCP classification policy with a SAP ingress policy.
configure> qos> sap-ingress policy-id [create]
num-qos-classifiers num-resources [ipv6 | no-ipv6]
[no] dscp-classification policy-id
default-fc fc
The following example shows the command usage to associate an IP DSCP classification policy with a SAP ingress policy.
configure> qos> sap-ingress 1000 create
num-qos-classifiers 16
dscp-classification 101
default-fc be
exit
Use the following syntax to associate a dot1p classification policy with a SAP ingress policy.
configure> qos> sap-ingress policy-id [create]
num-qos-classifiers num-resources [ipv6 | no-ipv6]
[no] dot1p-classification policy-id
default-fc fc
The following example shows the command usage to associate a dot1p classification policy with a SAP ingress policy.
— configure> qos> sap-ingress 1000 create
— num-qos-classifiers 16
— dscp-classification 101
— default-fc be
— exit
Use the following syntax to configure the classification policy to classify traffic to a forwarding class.
configure> qos> sap-ingress table-classification-criteria table-classification-criteria
The following example shows the command usage to configure the classification policy to classify traffic to a forwarding class.
configure> qos> sap-ingress table-classification-criteria none