Nokia 7210 SAS-series services configuration process

The following table lists the tasks necessary to configure and apply QoS policies. This guide is presented in an overall logical configuration flow. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table: Configuration process
Area	Task	Chapter
Policy configuration	Configuring QoS Policies
	DEI classification and marking	Discard eligibility indicator-based (DEI-based) classification and marking
	egress Rate	Port level egress rate-limiting
	accounting mode	Frame-based accounting
	network	Network QoS policies
	network queue	Network queue QoS policies
	SAP ingress	Service ingress QoS policies
	access egress	Access egress QoS policies on 7210 SAS-T, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE
	access egress for 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12	Access egress QoS policies for 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
	service egress	Service egress policies on 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
	port scheduler	QoS port scheduler policies for 7210 SAS-T
	scheduler policies	Schedulers on 7210 SAS-Mxp
	slope	Slope QoS policies
	queue management policies	Queue management policies
	remark policies	Remark policies
	access ingress	Access ingress QoS policies
Reference	list of IEEE, IETF, and other proprietary entities	Standards and protocol support