frame-based-accounting
config>ops
Supported on all 7210 SAS platforms as described in this document, including those operating in the access-uplink mode
Commands in this context configure frame-based accounting.
[no] egress-enable
config>qos>frame-based-accounting
Supported on all 7210 SAS platforms as described in this document, including those operating in the access-uplink mode
This command enables the frame-based-accounting for access-egress, network-queue, port scheduler, SAP or Network Aggregate Rate and port-level egress-rate.
The no form of this command disables frame-based-accounting for all egress QoS.
no egress-enable
[no] ingress-enable
config>qos>frame-based-accounting
Supported on all 7210 SAS platforms as described in this document, including those operating in the access-uplink mode
This command enables the frame-based accounting for SAP-ingress and network QoS.
The no form of this command disables frame-based accounting for SAP-ingress and network QoS.
no ingress-enable