You can copy an existing network queue policy, rename it with a new policy ID name, or overwrite an existing network queue policy. The overwrite option must be specified or an error occurs if the destination policy ID exists.
Use the following syntax to copy and overwrite a QoS policy.
config>qos# copy network-queue source-policy-id dest-policy-id [overwrite]
config>qos# copy network-queue nq1-cbs nq2-cbs
The following is a sample of the copied policies output.
*A:card-1>config>qos# info
#--------------------------------------------------
echo "QoS Slope and Queue Policies Configuration"
#--------------------------------------------------
.......
network-queue "nq1-cbs" create
queue 1
rate cir 0 pir 32
adaptation-rule cir max
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
rate cir 0 pir 4
exit
queue 7
rate cir 3 pir 93
exit
queue 8
rate cir 0 pir 3
exit
exit
network-queue "nq2-cbs" create
queue 1
rate cir 0 pir 32
adaptation-rule cir max
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
rate cir 0 pir 4
exit
queue 7
rate cir 3 pir 93
exit
queue 8
rate cir 0 pir 3
exit
exit
----------------------------------------------
*A:card-1>config>qos# info