You can copy an existing service ingress policy, rename it with a new policy ID value, or overwrite an existing policy ID. The overwrite option must be specified or an error occurs if the destination policy ID exists.
Use the following syntax to copy and overwrite QoS policies.
config>qos# copy {sap-ingress} source-policy-id dest-policy-id [overwrite]
*A:ALU-7210>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 101 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 200 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
----------------------------------------------
*A:ALU-7210>config>qos#