To modify access egress queue parameters specify the following:
queue ID value
On 7210 SAS-T, 8 Queues are identified and are mapped as defined in Table: Forwarding class to queue-ID map .
On 7210 SAS-Sx/S 1/10GE and 7210 SAS-Sx 10/100GE, a queue ID in the policy identifies a FC as per the table 32.Table: Forwarding class-to-queue ID map for 7210 SAS-Sx/S 1/10GE and 7210 SAS-Sx 10/100GE. In other words, the rate parameters configured for the FC/queue ID applies to the aggregate rate across both unicast and multicast queue for the FC.
queue parameters
Egress queues support configuration of CIR and PIR rates.
The following is a sample access egress QoS policy configuration output on 7210 SAS-T access-uplink mode.
*A:SAS-T>config>qos>access-egress>queue$ info
----------------------------------------------
adaptation-rule cir max
rate cir 2000 pir 30000
----------------------------------------------