Network QoS policies are available for use with network IP interfaces, network ports and hybrid ports when operating the 7210 SAS in network and standalone mode. The 7210 SAS-T, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12 support network and standalone mode of operation.
The following types of QoS mapping decisions are applicable on a network IP interface when operating in network and standalone mode:
MPLS LSP EXP value mapping to FC (if defined)
default QoS mapping
MPLS LSP EXP mapping to profile
The default QoS mapping always exists on an IP interface and every received packet will be mapped to this default if another explicitly defined matching entry does not exist.
The following types of QoS mapping decisions are applicable on a network port when operating in network mode:
Ethernet dot1P and IP DSCP value mapping (if defined) for use with IP packets
default QoS mapping
The default QoS mapping always exists on network port and every received packet is mapped to the default if another explicitly defined matching entry does not exist.