To create service ingress meter parameters, define the following:
A new meter ID value — The system will not dynamically assign a value.
Meter parameters — Ingress meters support the definition of either srTCM (Single Rate Tri-Color Meter) or trTCM (Two Rate Tri-Color Meter), CIR/PIR, CBS/MBS parameters.
The following is a sample ingress meter configuration output.
A:ALA-7>config>qos# info
#------------------------------------------
echo "QoS Policy Configuration"
#------------------------------------------
...
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 11 multipoint create
exit
meter 2 create
rate cir 11000
exit
meter 3 create
cbs 32
rate 11000
exit
meter 4 create
rate 1
exit
meter 5 create
cbs 64
mbs 128
rate cir 1500 pir 1500
exit
meter 6 create
mode srtcm
rate cir 2500 pir 2500
exit
meter 7 create
cbs 256
mbs 512
rate cir 100 pir 36
exit
meter 8 create
cbs 256
mbs 512
rate cir 11000
exit
meter 9 create
rate cir 11000
exit
meter 10 create
rate cir 1
exit
meter 12 create
rate cir 1500 pir 1500
exit
meter 13 create
rate cir 2500 pir 2500
exit
meter 14 create
rate cir 36 pir 100
exit
meter 15 create
rate cir 36 pir 100
exit
meter 16 create
cbs 128
mbs 256
rate cir 36 pir 100
exit
...
#------------------------------------------
A:ALA-7>config>qos#