max-avg percent
no max-avg
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
This command configures the maximum average value.
The no form of this command reverts to the default value.
max-avg 90 — high slope default is 90% buffer utilization
max-avg 75 — low slope default is 75% buffer utilization
Specifies the maximum average for the high or low slopes.
max-prob percent
no max-prob
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
This command configures the maximum probability value.
The no form of this command reverts to the default value.
max-avg 75 — high slope default is 75% maximum drop probability corresponding to max-avg
max-avg 75 — low slope default is 75% maximum drop probability corresponding to max-avg
Specifies the maximum probability for the high or low slopes.
[no] shutdown
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
This command enables or disables the administrative status of the WRED slope.
By default, all slopes are shutdown and have to be explicitly enabled (no shutdown), which implies a zero drop probability.
The no form of this command administratively enables the WRED slope.
shutdown
start-avg percent
no start-avg
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
This command is used to configure the starting average value.
The no form of this command reverts to the default value.
max-avg 70 — high slope default is 70% buffer utilization
max-avg 50 — low slope default is 50% buffer utilization
Specifies the starting average for the high or low slopes.