database [interface ip-int-name | ip-address] group group-ip-address [source src-ip-address]
database grp-interface interface-name [fwd-service service-id]
database [interface ip-int-name | ip-address] group grp-ip-address source src-ip-address
database host [ip-address]
database interface ip-int-name | ip-address [group grp-ip-address] [source src-ip-address]
clear>router>igmp
Supported on all 7210 SAS platforms as described in this document.
This command clears IGMP or PIM database statistics on a specified interface or IP address.
Clears the IGMP or PIM database on the specified interface.
Clears the IGMP or PIM database on the specified IP address.
Clears the multicast group address (ipv4 or ipv6) or zero in the specified address group.
Clears the IGMP or PIM database from the specified source IP address.
database [interface ip-int-name | mt-int-name | int-ip-address] [group grp-ip-address [source ip-address]] [family]
clear>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command clears IGMP or PIM database statistics on a specified interface or IP address.
Clears the IGMP or PIM database on the specified interface.
Clears the IGMP or PIM database on the specified IP address.
Clears the multicast group address (ipv4) or zero in the specified address group.
Clears the IGMP or PIM database from the specified source IP address.
Clears IPv4 information.
statistics [interface ip-int-name | ip-address]
clear>router>igmp
Supported on all 7210 SAS platforms as described in this document.
This command clears IGMP statistics on a specified interface or IP address.
An interface and group or source cannot be specified at the same time.
Clears IGMP statistics on the specified interface.
Clears IGMP statistics on the specified IP address.
statistics [{[interface ip-int-name | ip-address | mt-int-name]} {[group grp-ip-address [source ip-address]]}] [family]]
clear>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command clears PIM statistics on a specified interface or IP address.
An interface and group or source cannot be specified at the same time.
Clears PIM statistics on the specified interface.
Clears PIM statistics on the specified IP address.
When only the group address is specified and no source is specified, (*,G) statistics are cleared. When the group address is specified along with the source address, the (S,G) statistics are reset to zero.
When the source address is specified along with the group address, the (S,G) statistics are reset to zero.
Clears IPv4 information.
version [interface ip-int-name | ip-address]
clear>router>igmp
Supported on all 7210 SAS platforms as described in this document.
This command clears IGMP statistics on a specified interface or IP address.
Clears IGMP or PIM statistics on the specified interface.
Clears IGMP or PIM statistics on the specified IP address.
neighbor [ip-int-name | ip-address] [family]
clear>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command clears PIM neighbor data on a specified interface or IP address.
Clears PIM neighbor on the specified interface.
Clears PIM neighbor on the specified IP address.
Clears IPv4 information.
s-pmsi [mdSrcAddr] [mdGrpAddr] [vprnSrcAddr vprnGrpAddr]
clear>router>pim
7210 SAS-T (network mode only), 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Mxp, and 7210 SAS-Sx/S 1/10GE (in standalone mode)
This command clears the PIM selective provider multicast service interface cache.
Clears the specified source address used for Multicast Distribution Tree (MDT).
Clears the specified group address used for Multicast Distribution Tree (MDT).
Clears the specified source address of the multicast sender.
Clears the specified multicast group address.
msdp
clear>router
7210 SAS-Sx/S 1/10GE (standalone)
Commands in this context clear and reset MSDP entities and statistics.
cache [peer ip-address] [group ip-address] [source ip-address] [originrp ip-address]
clear>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command clears the MSDP cache.
Clears the cache of the IP address of the peer to which MSDP SA requests for groups matching this entry's group range were sent.
Clears the group IP address of the SA entry.
Clears the source IP address of the SA entry.
Clears the origin RP address type of the SA entry.
statistics [peer ip-address]
clear>router>msdp
7210 SAS-Sx/S 1/10GE (standalone)
This command clears IP address statistics of the peer to which MSDP SA requests for groups matching this entry's group range were sent.
Clears the statistics of the specified IP address.
igmp-snooping
clear>service>id
Supported on all 7210 SAS platforms as described in this document.
Commands in this context clear IGMP snooping-related data.
port-db {sap sap-id | sdp sdp-id:vc-id} [group grp-address [source ip-address]]
clear>service>id>igmp-snooping
Supported on all 7210 SAS platforms as described in this document.
This command clears the information from the IGMP snooping port database.
Clears IGMP snooping statistics matching the specified SAP ID and optional encapsulation value. The sap-id can be in one of the following formats:
Encapsulation type |
Syntax |
Example |
null |
port-id |
1/1/3 |
dot1q |
port-id :qtag1 |
1/1/3:100 |
qinq |
port-id :qtag1.qtag2 |
1/1/3:100.200 |
Specifies the encapsulation value on the specified port ID.
Clears only IGMP snooping entries associated with the specified mesh SDP or spoke-SDP. For a spoke-SDP, the VC ID must be specified; for a mesh SDP, the VC ID is optional.
Specifies the virtual circuit ID on the SDP ID for which to clear information.
Clears IGMP snooping statistics matching the specified group address.
Clears IGMP snooping statistics matching one particular source within the multicast group.
querier
clear>service>id>igmp-snooping
Supported on all 7210 SAS platforms as described in this document.
This command clears information from the IGMP snooping queriers for the VPLS service.
statistics [sap sap-id | sdp sdp-id:vc-id]
clear>service>id>igmp-snooping
Supported on all 7210 SAS platforms as described in this document.
This command clears IGMP snooping statistics for the VPLS service.
Displays IGMP snooping statistics for a specific SAP. The sap-id can be in one of the following formats:
Encapsulation type |
Syntax |
Example |
null |
port-id |
1/1/3 |
dot1q |
port-id :qtag1 |
1/1/3:100 |
qinq |
port-id :qtag1.qtag2 |
1/1/3:100.200 |
Specifies the encapsulation value on the specified port ID.
Displays the IGMP snooping statistics for a specific spoke or mesh SDP.
Specifies the virtual circuit ID on the SDP ID for which to display information.