Configuring MSDP parameters

Use the following commands to configure basic MSDP parameters.

config>router# msdp 
        peer ip-address 
            active-source-limit number 
            authentication-key [authentication-key | hash-key]  [hash | hash2 | custom] 
            default-peer 
            export policy-name [policy-name] 
            import policy-name [policy-name] 
            local-address ip-address 
            receive-msdp-msg-rate number interval seconds [threshold threshold] 
            no shutdown 
        no shutdown

Use the following CLI syntax to configure MSDP parameters.

config>router>msdp# peer 10.20.1.1
    config>router>msdp>peer# local-address 10.20.1.6
    config>router>msdp>peer# no shutdown
    config>router>msdp>peer# exit
    config>router>msdp# no shutdown
    config>router>msdp#

Example: Displaying the MSDP configuration

ALA-48>config>router>msdp# info
-------------------------------------------
         peer 10.20.1.1
             local-address 10.20.1.6
         exit
-------------------------------------------
ALA-48>config>router>msdp#