isis [isis-instance]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging of the IS-IS protocol entities.
Specifies the IS-IS instance.
[no] adjacency [ip-int-name | ip-address | nbr-system-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS adjacency.
The no form of this command disables debugging.
Debugs adjacencies with the specified interface.
Debugs adjacencies with the specified IP address.
Debugs adjacencies with the specified system ID.
[no] cspf
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS constraint-based shortest path first (CSPF).
The no form of this command disables debugging.
[no] graceful-restart
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS graceful-restart.
The no form of this command disables debugging.
interface [ip-int-name | ip-address]
no interface
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS interface.
The no form of this command disables debugging.
Debugs the interface information associated with the specified interface.
Debugs the interface information associated with the specified IP address.
leak [ip-address]
no leak
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS leaks.
The no form of this command disables debugging.
Debugs IS-IS leak information associated with the specified IP address.
[no] lsdb [level-number] [system-id | lsp-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for the Link State DataBase (LSDB).
The no form of this command disables debugging.
Debugs for level 1 or level 2.
Debugs the LSDB associated with the specified system ID.
Debugs the LSDB associated with the specified LSP ID.
[no] misc
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for miscellaneous IS-IS events.
The no form of this command disables debugging.
packet [packet-type] [ip-int-name | ip-address] [detail]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS packets.
The no form of this command disables debugging.
Specifies the packet type to debug.
Specifies the interface name to debug.
Only displays the interface information associated with the specified IP address.
Specifies to provide detailed debugging information.
rtm [ip-address]
no rtm
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS route table manager (RTM).
The no form of this command disables debugging.
Displays the interface information associated with the specified IP address.
[no] spf [level-number] [system-id]
debug>router>isis
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for IS-IS SFP.
The no form of this command disables debugging.
Specifies level 1 or level 2.
Specifies the system ID.