[no] adjacency
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM adjacencies.
all [group grp-ip-address] [source ip-address] [detail]
no all
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for all the PIM modules.
Debugs information associated with all PIM modules.
Debugs information associated with all PIM modules.
Debugs detailed information on all PIM modules.
assert [group grp-ip-address] [source ip-address] [detail]
no assert
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM assert mechanism.
Debugs information associated with the PIM assert mechanism.
Debugs information associated with the PIM assert mechanism.
Debugs detailed information on the PIM assert mechanism.
bgp [source ip-address] [group group-ip-address] [peer peer-ip-address]
no bgp
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM/BGP specific interoperation.
Debugs BGP information associated with the specified source.
Debugs BGP information associated with the specified group.
Debugs BGP information associated with the specified peer.
bsr [detail]
no bsr
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables debugging for PIM bootstrap mechanism.
The no form of this command disables debugging.
Debugs detailed information on the PIM bootstrap mechanism.
data [group grp-ip-address] [source ip-address] [detail]
no data
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM data exception.
Debugs information associated with the specified data exception.
Debugs information associated with the specified data exception.
Debugs detailed IP data exception information.
db [group grp-ip-address] [source ip-address] [detail]
no db
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM database.
Debugs information associated with the specified database.
Debugs information associated with the specified database.
Debugs detailed IP database information.
dynmldp [detail]
no dynmldp
debug>router>pim
7210 SAS-T (network mode only), 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp.
This command enables and disables debugging for dynamic MLDP.
Debugs detailed dynamic MLDP information.
interface [ip-int-name | mt-int-name | ip-address] [detail]
no interface
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM interface.
Debugs the information associated with the specified IP interface name.
Debugs the information associated with the specified IP address.
Debugs detailed IP interface information.
jp [group grp-ip-address] [source ip-address] [detail]
no jp
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM Join-Prune mechanism.
Debugs information associated with the specified Join-Prune mechanism.
Debugs information associated with the specified Join-Prune mechanism.
Debugs detailed Join-Prune mechanism information.
mrib [group grp-ip-address] [source ip-address] [detail]
no mrib
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM MRIB.
Debugs information associated with the specified PIM MRIB.
Debugs information associated with the specified PIM MRIB.
Debugs detailed MRIB information.
msg [detail]
no msg
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM messaging.
Debugs detailed messaging information.
mvpn-rtcache [group grp-ip-address] [peer ip-address]
no mvpn-rtcache
debug>router>pim
7210 SAS-T (network mode only), 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Mxp, and 7210 SAS-Sx/S 1/10GE (in standalone mode)
This command enables and disables debugging for the PIM MVPN route cache.
Debugs information associated with the specified group.
Debugs information associated with the specified peer.
packet [hello | register | register-stop | jp | bsr | assert] [ip-int-name | ip-address]
no packet
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM packets.
PIM packet types.
Debugs the information associated with the specified IP interface name.
Debugs the information associated with the specified IP address of a particular packet type.
red [detail]
no red
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM redundancy messages to the standby CPM.
Displays detailed redundancy information.
register [group grp-ip-address] [source ip-address] [detail]
no register
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables and disables debugging for PIM Register mechanism.
Debugs information associated with the specified PIM register.
Debugs information associated with the specified PIM register.
Debugs detailed register information.
rtm [detail]
no rtm
debug>router>pim
Supported on all 7210 SAS platforms as described in this document.
This command enables the disables debugging for PIM RTM.
Debugs detailed RTM information.
s-pmsi [{vpnSrcAddr [vpnGrpAddr]} [mdSrcAddr]] [detail]
no s-pmsi
debug>router>pim
7210 SAS-T (network mode only), 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Mxp, and 7210 SAS-Sx/S 1/10GE (in standalone mode)
This command enables debugging for PIM selective provider multicast service interface.
The no form of this command disables the debugging.
Specifies the VPN source address.
Specifies the VPN group address
Specifies the source address of the multicast domain.
Displays detailed information for selective PMSI.
tunnel-interface [rsvp-p2mp lsp-name] [sender ip-address] [detail]
tunnel-interface [ldp-p2mp p2mp-id] [sender ip-address] [detail]
no tunnel-interface [rsvp-p2mp lsp-name] [sender ip-address]
no tunnel-interface [ldp-p2mp p2mp-id] [sender ip-address]
debug>router>pim
7210 SAS-T (network mode only), 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp.
This command enables and disables the debugging for PIM tunnel interfaces.
Specifies the LSP for RSVP P2MP.
Specifies the IP address of the sender.
Specifies the P2MP ID for LDP P2MP.
Displays detailed information for PIM tunnel interfaces.