[no] auth [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP authentication.
Debugs the RIP authentication for the neighbor IP address or interface.
[no] error [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP errors.
Debugs the RIP errors sent on the neighbor IP address or interface.
[no] events [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP events.
Debugs the RIP events sent on the neighbor IP address or interface.
[no] holddown [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP hold downs.
Debugs the RIP hold downs sent on the neighbor IP address or interface.
[no] packets [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP packets.
Debugs the RIP packets sent on the neighbor IP address or interface.
[no] request [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP requests.
Debugs the RIP requests sent on the neighbor IP address or interface.
[no] trigger [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP trigger updates.
Debugs the RIP updates sent on the neighbor IP address or interface.
[no] updates [neighbor ip-int-name | ip-addr]
debug>router>rip
This command enables debugging for RIP updates.
Debugs the RIP updates sent on the neighbor IP address or interface.