Deleting a neighbor

To delete a neighbor, you must shut down the neighbor before issuing the no neighbor ip-addr command.

Use the following syntax to delete a neighbor.

config>router# bgp
    group name
    no neighbor ip-address
    shutdown
        no peer-as asn
        shutdown

Example

config>router# bgp
    config>router>bgp# group headquarters1
    config>router>bgp>group# neighbor 10.0.0.103
    config>router>bgp>group>neighbor# shutdown
    config>router>bgp>group>neighbor# exit
    config>router>bgp>group# no neighbor 10.0.0.103

Example

The following is a sample ‟headquarters1” configuration output with the neighbor 10.0.0.103 removed.

ALA-B>config>router>bgp# info
----------------------------------------------
            group "headquarters1"
               description ‟HQ execs”
                local-address 10.0.0.104
                neighbor 10.0.0.5
                    passive
                    peer-as 300
                exit
            exit
----------------------------------------------
ALA-B>config>router>bgp#