Applying ETH-CFM parameters

Use the following syntax to apply ETH-CFM parameters to the following entities.

— config>service>epipe>sap
    — eth-cfm
    — mep mep-id domain md-index association ma-index [direction
    — {up | down}]
            — ais-enable
                — client-meg-level [level [level ...]
                — interval {1 | 60}
                — priority priority-value
            — ccm-enable
            — ccm-ltm-priority priority
            — eth-test-enable
                — test-pattern {all-zeros | all-ones} [crc-enable]
            — low-priority-defect {allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
            — [no] shutdown

— config>service>epipe>spoke-sdp
    — eth-cfm
    — mep mep-id domain md-index association ma-index [direction
    — {up | down}]
        — ccm-enable
        — ccm-ltm-priority priority
        — eth-test-enable
            — test-pattern {all-zeros | all-ones} [crc-enable]
        — low-priority-defect {allDef|macRemErrXcon|remErrXcon|
            — errXcon|xcon|noXcon}
        — [no] shutdown

— config>service>vpls>sap
    — eth-cfm
    — mip
    — mep mep-id domain md-index association ma-index [direction {up | down}]
    — no mep mep-id domain md-index association ma-index
        — ccm-enable
        — ccm-ltm-priority priority
        — eth-test-enable
            — test-pattern {all-zeros | all-ones} [crc-enable]
        — low-priority-defect {allDef|macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}
        — mac-address mac-address
        — [no] shutdown

— config>service>vpls>mesh-sdp sdp-id[:vc-id] [vc-type {ether|vlan}]
    — eth-cfm
    — mep mep-id domain md-index association ma-index [direction
    — {up | down}]
        — ccm-enable
        — ccm-ltm-priority priority
        — eth-test-enable
            — test-pattern {all-zeros | all-ones} [crc-enable]
        — low-priority-defect {allDef|macRemErrXcon|remErrXcon|
        — errXcon|xcon|noXcon}
        — mac-address mac-address
        — no] shutdown

— config>service>vpls
    — spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [split-horizon-group group-name] [no-endpoint]
    — spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [split-horizon-group group-name] endpoint endpoint
    — eth-cfm
    — map mep-id domain md-index association ma-index [direction
    — {up | down}]
        — ccm-enable
        — ccm-ltm-priority priority
        — eth-test-enable
            — test-pattern {all-zeros | all-ones} [crc-enable]
        — low-priority-defect {allDef | macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}
        — mac-address mac-address
        — no] shutdown

— oam
    — eth-cfm linktrace mac-address mep mep-id domain md-index association ma-index [ttl ttl-value]
    — eth-cfm loopback mac-address mep mep-id domain md-index association ma-index [send-count send-count] [size data-size] [priority priority]
    — eth-cfm eth-test mac-address mep mep-id domain md-index association ma-index [priority priority] [data-length data-length]
    — eth-cfm one-way-delay-test mac-address mep mep-id domain md-index association ma-index [priority priority]
    — eth-cfm two-way-delay-test mac-address mep mep-id domain md-index association ma-index [priority priority]
    — eth-cfm two-way-slm-test mac-address mep mep-id domain md-index association ma-index [priority priority]