The most basic IES service configuration has the following entities:
customer ID (refer to Configuring customers accounts)
an interface to create and maintain IP routing interfaces within IES service ID
a SAP on the interface specifying the access port and encapsulation values
The following is a sample configuration output of an IES service on ALA-48 on an access-uplink SAP (applicable for access-uplink mode only).
*A:ALA-48>config>service# info
----------------------------------------------
ies 1000 customer 50 create
description "to internet"
interface "to-web" create
address 10.1.1.1/24
sap 1/1/5:0.* create
exit
exit
no shutdown
----------------------------------------------
*A:ALA-48>config>service#
The following is a sample basic IES service configuration for IPv6, along with the use of max-ipv6-routes on the 7210 SAS.
The following is a sample allocation of IPv6 routes on the node.
*A:7210SAS>config>system>res-prof# info
----------------------------------------------
max-ipv6-routes 1000
----------------------------------------------
NOTE: the node must be rebooted after the above change.
*A:ALA-50>config>service# info
----------------------------------------------
ies 1000 customer 50 vpn 1000 create
description "to inband-mgmt"
interface "to-mgmt" create
ipv6
address 2001:db8::1/24
sap 1/1/10:100.* create
exit
exit
no shutdown
----------------------------------------------
*A:ALA-50>config>service#
The following is a sample configuration output of an IES service on ALA-50.
*A:ALA-50>config>service# info
----------------------------------------------
ies 1000 customer 50 vpn 1000 create
description "to internet"
interface "to-web" create
address 10.1.1.1/24
sap 1/1/10:100 create
exit
exit
no shutdown
----------------------------------------------
*A:ALA-50>config>service#