id service-id
clear>service
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command clears commands for a specific service.
Specifies the ID that uniquely identifies a service.
spoke-sdp sdp-id:vc-id ingress-vc-label
clear>service>id
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command clears and resets the spoke-SDP bindings for the service.
Specifies the spoke-SDP ID to be reset.
Specifies the virtual circuit ID on the SDP ID to be reset.
Specifies the ingress VC label to be cleared.
sap sap-id {all | cem | counters | stp}
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command clears SAP statistics for a SAP.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
Clears all SAP queue statistics and STP statistics.
Clears all queue statistics associated with the SAP.
Clears all STP statistics associated with the SAP.
Clears all L2PT statistics associated with the SDP.
sdp sdp-id keep-alive
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command clears keepalive statistics associated with the SDP ID.
Specifies the SDP ID for which to clear keepalive statistics.
counters
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command clears all traffic counters associated with the service ID.
spoke-sdp sdp-id[:vc-id] {all | counters | stp}
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode.
This command clears statistics for the spoke-SDP bound to the service.
Specifies the spoke-SDP ID for which to clear statistics.
Specifies the virtual circuit ID on the SDP ID to be reset.
Clears all queue statistics and STP statistics associated with the SDP.
Clears all queue statistics associated with the SDP.
Clears all STP statistics associated with the SDP.
stp
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command clears all spanning tree statistics for the service ID.
statistics
clear>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
Commands in this context clear statistics for a specific service entity.