Common configuration tasks

This section provides a brief overview of the tasks that must be performed to configure a VPRN service and provides the CLI commands:

1. Associate a VPRN service with a customer ID.

2. Define an autonomous system (optional).

3. Define a route distinguisher (mandatory).

4. Define VRF route-target associations or VRF import/export policies.

5. Create an interface.

6. Define SAP parameters on the interface:

   • Select nodes and ports.

   • Optional - select QoS policies other than the default (configured in config>qos context)

   • Optional - select filter policies (configured in config>filter context)

   • Optional - select accounting policy (configured in config>log context)

7. Define BGP parameters (optional):

   • BGP must be enabled in the config>router>bgp context.

8. Enable the service.