Configuring Ingress SAP Parameters

By default, QoS policy ID 1 is applied to ingress service SAPs. Existing filter policies or other existing QoS policies can be associated with service SAPs on ingress and egress ports.

Ingress and egress SAP parameters can be applied to local and distributed Epipe service SAPs.

The following is a sample of SAP ingress and egress parameters:

ALA-1>config>service# epipe 5500 
     config>service>epipe# sap 1/1/3:21
     config>service>epipe>sap# ingress
     config>service>epipe>sap>ingress# qos 555
     config>service>epipe>sap>ingress# filter ip 1
     config>service>epipe>sap>ingress# exit
     config>service>epipe>sap#

The following is a sample Epipe SAP ingress configuration output:

A:ALA-1>config>service#
----------------------------------------------
...
        epipe 5500 customer 5 vpn 5500 create
            description "Distributed epipe service to east coast"
            sap 1/1/3:21 create
                ingress
                    qos 555
                    filter ip 1
                exit
            exit
            no shutdown
        exit
----------------------------------------------
A:ALA-1>config>service#