Use the following CLI syntax to create a VRPN service. A route distinguisher must be defined in order for VPRN to be operationally active.
— config>service# vprn service-id [customer customer-id]
— route-distinguisher [ip-address:number1 | asn:number2]
— description description-string
— no shutdown
The following is a sample VPRN service configuration output.
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
route-distinguisher 10001:0
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service>vprn#