[no] id service-id
debug>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command debugs commands for a specific service.
The no form of this command disables debugging.
Specifies the ID that uniquely identifies a service.
[no] sap sap-id
debug>service>id
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for a specific SAP.
The no form of this command disables debugging.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
[no] sdp sdp-id:vc-id
debug>service>id
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command enables STP debugging for a specific SDP.
The no form of this command disables debugging.
[no] event-type {config-change | svc-oper-status-change | sap-oper-status-change | sdpbind-oper-status-change}
debug>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables debugging for a particular event type.
The no form of this command disables debugging.
The sdpbind-oper-status-change parameter is not supported on 7210 SAS platforms operating in access-uplink mode.
[no] event-type {config-change | oper-status-change}
debug>service>id>sap
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables debugging for a particular event type.
The no form of this command disables debugging.
[no] stp
debug>service>id
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables the context for debugging STP.
The no form of this command disables debugging.
all-events
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for all events.
The no form of this command disables debugging.
[no] bpdu
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for received and transmitted BPDUs.
The no form of this command disables debugging.
[no] core-connectivity
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for core connectivity.
The no form of this command disables debugging.
[no] exception
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for exceptions.
The no form of this command disables debugging.
[no] fsm-state-changes
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for FSM state changes.
The no form of this command disables debugging.
[no] fsm-timers
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for FSM timer changes.
The no form of this command disables debugging.
[no] port-role
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for changes in port roles.
The no form of this command disables debugging.
[no] port-state
debug>service>stp
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command enables STP debugging for port states.
The no form of this command disables debugging.