description description-string
no description
config>service>epipe
config>service>epipe>sap
config>service>epipe>spoke-sdp (not supported in access-uplink operating mode)
config>connection-profile
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command creates a text description stored in the configuration file for a configuration context. The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
No description associated with the configuration context.
Specifies the description character string. Allowed values are any string up to 80 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
[no] shutdown
config>service>epipe
config>service>epipe>sap
config>service>epipe>spoke-sdp (not supported in access-uplink operating mode)
config>service>epipe>sap>eth-cfm>mep
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command is entered, the service becomes administratively up and then tries to enter the operationally up state. Default administrative states for services and service entities is described as follows in Special Cases.
The no form of this command places the entity into an administratively enabled state.