ies service-id customer customer-id [create] [vpn vpn-id]
no ies service-id
config>service
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command creates or maintains an Internet Enhanced Service (IES) instance.
If the service-id does not exist, a context for the service is created. If the service-id exists, the context for editing the service is entered.
IP interfaces defined within the context of an IES service ID must have a SAP created.
When a service is created, the customer keyword and customer-id must be specified which associates the service with a customer. The customer-id must already exist having been created using the customer command in the service context. When a service has been created with a customer association, it is not possible to edit the customer association. The service must be deleted and recreated with a new customer association.
When a service is created, the use of the customer customer-id is optional for navigating into the service configuration context. Attempting to edit a service with the incorrect customer-id specified results in an error.
More than one IP interface may be created within a single IES service ID.
For 7210 SAS platforms operating in access-uplink mode, IES is used for in-band management of the node and cannot be used to deliver services. Typically, a single IP interface per IES is sufficient for management purposes.
The no form of this command deletes the IES service instance with the specified service-id. The service cannot be deleted until all the IP interfaces defined within the service ID have been shutdown and deleted.
No IES service instances exist until they are explicitly created.
Specifies the unique service identification number or string identifying the service in the service domain. This ID must be unique to this service and may not be used for any other service of any type. The service-id must be the same number used for every 7210 SAS on which this service is defined.
Specifies the customer ID number to be associated with the service. This parameter is required on service creation and optional for service editing or deleting.
Specifies the VPN ID assigned to the service. This parameter is only supported on 7210 SAS platforms operating in network mode.
service-name service-name
no service-name
config>service>epipe
config>service>ies
config>service>vpls
config>service>vprn
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command configures an optional service name, up to 64 characters, which adds a name identifier to a specific service to then use that service name in configuration references as well as display and use service names in show commands throughout the system. This helps the service provider/administrator to identify and manage services within the 7210 SAS platforms.
All services are required to assign a service ID to initially create a service. However, either the service ID or the service name can be used o identify and reference a specific service when it is initially created.
Specifies a unique service name to identify the service. Service names may not begin with an integer (0-9).