statistics
config>service>ies>if>sap
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode.
Commands in this context configure the counters associated with SAP ingress and egress.
ingress
config>service>ies>if>sap>statistics
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode.
Commands in this context configure the ingress SAP statistics counters.
counter-mode {in-out-profile-count | forward-drop-count}
config>service>ies>if>sap>statistics>ingress
Supported on all 7210 SAS platforms as described in this document, including those operating in access-uplink mode
This command sets the counter mode for the counters associated with sap ingress meters or policers. A pair of counters is available with each meter. These counters count different events based on the counter mode value.
The counter mode can be changed if an accounting policy is associated with a SAP. If the counter mode is changed, the counters associated with the meter are reset and the counts are cleared. If an accounting policy is in use when the counter-mode is changed, a new record is written into the current accounting file.
Execute the following sequence of commands on the specified SAP to ensure that the correct statistics are collected when the counter-mode is changed:
Execute the config service ies interface sap no collect-stats command, to disable writing of accounting records for the SAP.
Change the counter mode to the desired option by executing the config service ies interface sap statistics ingress counter-mode {in-out-profile-count | forward-drop-count} command.
Execute the config service ies interface sap collect-stats command, to enable writing of accounting records for the SAP.
The no form of this command reverts the counter mode to the default value.
in-out-profile-count
If the counter mode is specified as in-out-profile-count, one counter counts the total in-profile packets and octets received on ingress of a SAP and another counts the total out-of-profile packets and octets received on ingress of a SAP. A packet is determined to be in-profile or out-of-profile based on the meter rate parameters configured. A packet is dropped by the policer if it exceeds the configured PIR rate. Dropped counts are not maintained in hardware when this mode is used. It is obtained by subtracting the sum of in-profile count and out-of-profile count from the total SAP ingress received count and displayed.
If the counter mode is specified as forward-drop-count, one counter counts the forwarded packets and octets received on ingress of a SAP and another counts the dropped packets. The forwarded count is the sum of in-profile and out-of-profile packets/octets received on SAP ingress. The dropped count is count of packets/octets dropped by the policer. A packet is determined to be in-profile or out-of-profile based on the meter rate parameters configured. A packet is dropped by the policer if it exceeds the configured PIR rate. The in-profile count and out-of-profile count is not individually available when operating in this mode.