Modifying SDPs

Note:

SDPs are supported by all 7210 SAS platforms as described in this document, except those operating in access-uplink mode.

To access a specific SDP, you must specify the SDP ID. To display a list of SDPs, use the show service sdp command. Enter the parameter, such as description, far-end, and lsp, and then enter the new information.

Note:

Once an SDP is created, the SDP encapsulation type cannot be modified.

— config>service# sdp sdp-id

Example:

— config>service# sdp 79 
    — config>service>sdp# description ‟Path-to-107”
    — config>service>sdp# shutdown
    — config>service>sdp# far-end ‟10.10.10.107”
    — config>service>sdp# path-mtu 1503
    — config>service>sdp# no shutdown