SAP Auto Edge

The SAP edge-port command is used to instruct STP to dynamically decide whether the SAP is connected to another bridge.

If auto-edge is enabled, and STP concludes there is no bridge behind the SAP, the OPER_EDGE variable will dynamically be set to true. If auto-edge is enabled, and a BPDU is received, the OPER_EDGE variable will dynamically be set to true (see SAP Edge Port).

Valid values for SAP auto-edge are enabled and disabled with enabled being the default.

config>service>vpls>sap>stp# 
[no] auto-edge

Default: auto-edge