tools
root
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
Commands in this context enable useful tools for debugging purposes.
Enables dump tools for the various protocols.
Enables tools to perform specific tasks.
perform
tools
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
Commands in this context enable tools to perform specific tasks.
services
tools>perform
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
Commands in this context configure tools for services.
id service-id
tools>perform>service
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
Commands in this context configure tools for a specific service.
Specify an existing service ID.
endpoint endpoint-name
tools>perform>service>id
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command configures tools for a specific VLL service endpoint.
Specify an existing VLL service endpoint name.
force-switchover sdp-id:vc-id
no force-switchover
force-switchover spoke-sdp-fec [1..4294967295]
tools>perform>service>id>endpoint
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command forces a switch of the active spoke-SDP for the specified service.
Specify an existing spoke-SDP for the service.
The spoke-sdp-fec for a FEC129 AII Type 2 spoke-sdp. This parameter is mutually exclusive with sdp:vc-id used for a FEC 128 spoke-sdp.
The following output is an example of force switchover information.
Sample Output*A:Dut-B# show service id 1 endpoint
===============================================================================
Service 1 endpoints
===============================================================================
Endpoint name : mcep-t1
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : false
Block On Mesh Fail : true
Multi-Chassis Endpoint : 1
MC Endpoint Peer Addr : 10.1.1.3
Psv Mode Active : No
Tx Active : 221:1(forced)
Tx Active Up Time : 0d 00:00:17
Revert Time Count Down : N/A
Tx Active Change Count : 6
Last Tx Active Change : 02/14/2009 00:17:32
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
Spoke-sdp: 221:1 Prec:1 Oper Status: Up
Spoke-sdp: 231:1 Prec:2 Oper Status: Up
================================================================================
*A:Dut-B#
eval-pw-template
tools>perform>service
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command reevaluates the pseudowire template policy.
Specifies the pseudowire template policy.
eval-expired-fec spoke-sdp-fec-id
eval-expired-fec all
tools>perform>service>pw-routing
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command resets the retry counter and retry timer for the specified spoke-SDP and attempt to establish the spoke-SDP again.
spoke-sdp-fec-release global-id[:prefix[:ac-id]]
tools>perform>service
Supported on all 7210 SAS platforms as described in this document, except those operating in access-uplink mode
This command is used to clear the MS-PW bindings associated with particular SAII or TAII on an S-PE.