The following restrictions apply to VLAN range SAPs:
The access SAPs that specify VLAN range values (using the connection profile) are only allowed in an Epipe service. The system allows only one range SAP in an Epipe service, and fails any attempt to configure more than one. Range SAPs can only be configured on access ports.
In access-uplink mode, the dot1q range SAP is only allowed to be configured in a service with svc-sap-type set to dot1q-range. In network mode, the dot1q range SAP is allowed to be configured in a service with svc-sap-type set to any.
The access SAPs using VLAN range values are only allowed for dot1q encapsulation ports or LAGs. A connection profile is used to specify either range of VLAN IDs or individual VLANs to be grouped together in a single SAP.
A connection profile is used to specify either range of VLAN IDs or individual VLANs to be grouped together in a single SAP.
Multiple connection profiles can be used per port or LAG, as long as the VLAN value specified by each of them does not overlap. The number of VLAN ranges available per port/LAG is limited. The available number must be shared among all the SAPs on the port/LAG.
The connection profile associated with a SAP cannot be modified. To modify a connection profile, it must be removed from all SAPs that are using it.