screen
clear
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command allows an operator to clear the Telnet or console screen.
ptp inactive-peers
ptp statistics
ptp peer ip-address statistics
clear>system
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
This command clears PTP statistics.
Keyword to remove PTP peers which are not currently exchanging PTP packets with the router
Clears statistics for the specified peer.
Clears all PTP statistics.
port port-id statistics
clear>system>ptp
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
This command clears PTP port information.
Clears information for the specified port.
Clears statistics information for the specified port.
script-control
clear>system
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
Commands in this context clear script information.
script-policy
clear>system>script-control
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
Commands in this context clear script policy information.
completed [script-policy-name] [owner owner-name]
clear>system>script-control>script-policy
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears completed script run history entries.
Clears history entries only for the specified script-policy.
Clears history entries only for script-policies with the specified owner.
sync-if-timing {ref1 | ref2 | bits1 | bits2}
clear>system
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode; not supported on platforms configured in the standalone-VC operating mode
This command individually clears (re-enable) a previously failed reference. As long as the reference is one of the valid options, this command is always executed. An inherent behavior enables the reverted mode which causes a re-evaluation of all available references.
Clears the first timing reference.
Clears the second timing reference.
Clears the BITS1 port reference. This keyword is only supported on 7210 SAS-Mxp, 7210 SAS-T, 7210 SAS-R6 and 7210 SAS-R12 platforms.
Clears the BITS2 port reference. This keyword is only supported on 7210 SAS-T and 7210 SAS-Mxp platforms.
trace log
clear
Supported on all 7210 SAS platforms as described in this document
This command allows an operator to clear the trace log.