Monitor commands display specified statistical information related to the monitor subject (such as filter, port, QoS, router, service) at a configurable interval until a count is reached. The CLI monitor commands are found in the root>monitor context of the CLI tree.
The monitor command output displays a snapshot of the current statistics. The output display refreshes with subsequent statistical information at each configured interval and is displayed as a delta to the previous display.
The <Ctrl-c> keystroke interrupts a monitoring process. Monitor command configurations cannot be saved. You must enter the command for each monitoring session. Note that if the maximum limits are configured, you can monitor the statistical information for a maximum of 60 * 999 sec ~ 1000 minutes.
The CLI monitor command are described in the following table.
Command |
Description |
|---|---|
filter |
Enables IP, IPv6 and MAC filter monitoring at a configurable interval until that count is reached. |
lag |
Enables Link Aggregation Group (LAG) monitoring to display statistics for individual port members and the LAG. |
port |
Enables port traffic monitoring. The specified ports statistical information displays at the configured interval until the configured count is reached. |
router |
Enables virtual router instance monitoring at a configurable interval until that count is reached. |
service |
Monitors commands for a particular service. |