CLI syntax for 7210 SAS-R6 and 7210 SAS-R12

Example

The following is a sample CLI configuration for the 7210 SAS-R6 and 7210 SAS-R12.

*A:sasr_dutb>config>system>sync-if-timing# info detail
----------------------------------------------
            no ql-selection
            ref-order bits1 ref1 ref2 ptp
            ref1
                shutdown
                no source-port
                no ql-override
            exit
            ref2
                shutdown
                no source-port
                no ql-override
            exit
            bits1
                interface-type ds1 esf
                no ql-override
                input
                    shutdown
                exit
                output
                    shutdown
                    line-length 110
                exit
            exit
            ptp
                shutdown
                no ql-override
            exit
            no revert
----------------------------------------------
*A:sasr_dutb>config>system>sync-if-timing#