[no] shutdown
config>system>time>sntp
config>system>lldp
config>system>sync-if-timing>ptp
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
The config>system>sync-if-timing>ptp context is not supported on 7210 SAS-Sx 10/100GE-Sx 10/100GE and 7210 SAS-S 1/10GE platforms.
This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.
The noform of this command administratively enables an entity.
Unlike other commands and parameters where the default state is not indicated in the configuration file, the shutdown and no shutdown states are always indicated in system generated configuration files.
The no form of this command places an entity in an administratively enabled state.
description description-string
no description
config>system>time>sntp
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
The command creates a string that can be used to identify the purpose of this event. This is an optional parameter and can be 80 characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.