When the TiMOS image boots up on the CPM-IMM nodes and the IMM-only node, users must provision the card type on each node so that the software knows which hardware platforms are members of the VC. The software can then determine the logical IMM types, which are the slots of the VC. Provisioning the card type is a mandatory step in the bootup process for all nodes of the VC in order for the nodes/cards to be fully functional. Use the following CLI command:
A:Dut-A# configure card 1 card-type
- card-type <card-type>
- no card-type
<card-type> : sas-sx-24sfp-4sfpp | sas-sx-48sfp-4sfpp | sas-sx-24t-
4sfpp | sas-sx-48t-4sfpp | sas-s-24sfp-4sfpp|sas-s-48sfp-4sfpp|sas-s-24t-4sfpp|sas-
s-48t-4sfpp
The card type can be preprovisioned and allows for preprovisioning of services. If the software-determined card type does not match the configured card type for the slot number, a provisioning mismatch error is logged. The software determines the card type by reading the information on the EEPROM of the platform.
The following table lists the supported card types associated with the 7210 SAS-Sx 1/10GE platform.
Card type |
7210 SAS-Sx 1/10GE platform |
|---|---|
sas-sx-24sfp-4sfpp |
7210 SAS-Sx 1/10GE 22F 2C 4SFP+ |
sas-sx-48sfp-4sfpp |
7210 SAS-Sx 1/10GE 46F 2C 4SFP+ |
sas-sx-24t-4sfpp |
7210 SAS-Sx 1/10GE 24T 4SFP+ |
sas-sx-48t-4sfpp |
7210 SAS-Sx 1/10GE 48T 4SFP+ |
sas-sx-24tp-4sfpp |
7210 SAS-Sx 1/10GE 24Tp 4SFP+ PoE |
sas-sx-48tp-4sfpp |
7210 SAS-Sx 1/10GE 48Tp 4SFP+ PoE |
The following table lists the supported card types associated with the 7210 SAS-S 1/10GE platform.
Card type |
7210 SAS-S 1/10GE platform |
|---|---|
sas-s-24sfp-4sfpp |
7210 SAS-S 1/10GE 24F 4SFP+ |
sas-s-48sfp-4sfpp |
7210 SAS-S 1/10GE 48F 4SFP+ |
sas-s-24t-4sfpp |
7210 SAS-S 1/10GE 24T 4SFP+ |
sas-s-48t-4sfpp |
7210 SAS-S 1/10GE 48T 4SFP+ |
sas-s-24tp-4sfpp |
7210 SAS-S 1/10GE 24Tp 4SFP+ PoE |
sas-s-48tp-4sfpp |
7210 SAS-S 1/10GE 48Tp 4SFP+ PoE |