Sample output: BOF configuration for 7210 SAS-Mxp and 7210 SAS-T

Example

The following is a sample output of a BOF configuration for the 7210 SAS-Mxp and 7210 SAS-T.

A:7210>show# bof
===============================================================================
BOF (Memory)
===============================================================================
    primary-image      ftp://*:*@xxx.xxx.xxx.xx//import/panos_builds/nightly/
2.0                                             /S80/MTU-sultan/
    primary-config     tftp://xx.xxx.xx.xxx/MTU/mtu3DGP.cfg
#eth-mgmt Port Settings:
    eth-mgmt-disabled
#uplinkA Port Settings:
    uplinkA-port       1/1/24
    uplinkA-address    xx.xxx.xx.xx/24
uplinkA-autoneg
    uplinkA-duplex     full
    uplinkA-speed      1000
uplinkA-vlan       0
#uplinkB Port Settings:
    uplinkB-port       1/1/2
    uplinkB-address    0
uplinkB-autoneg
    uplinkB-duplex     full
    uplinkB-speed      1000
    uplinkB-vlan       0
#System Settings:
    wait               3
    persist            off
    console-speed      115200
    no console-disabled 
===============================================================================
A:7210>show#