Sample output: BOF configuration for 7210 SAS-R12

Example

The following is a sample output of a BOF configuration for 7210 SAS-R12.

--------------
A:7210SAS# show bof 
===============================================================================
BOF (Memory)
===============================================================================
    primary-image      ftp://*:*@xx.xxx.xx.xx/./images/SASR12-KT2
    primary-config     cf1:\sreekak.cfg
    secondary-config   cf2:\sreekak.cfg
#eth-mgmt Port Settings:
    no  eth-mgmt-disabled
    eth-mgmt-address   xx.xxx.xx.xx/24 active
    eth-mgmt-address   xx.xxx.xx.xx/24 standby
    eth-mgmt-route     xx.xxx.x.x/16 next-hop xx.xxx.xx.x
    eth-mgmt-route     xxx.x.x.x/8 next-hop xx.xxx.xx.x
    eth-mgmt-autoneg
    eth-mgmt-duplex    full
    eth-mgmt-speed     100
#System Settings:
    wait               3
    persist            off
    console-speed      115200
    no  console-disabled
===============================================================================
A:7210SAS#