The following configuration guidelines apply to 7210 SAS-R6 and 7210 SAS-R12:
The user can change the system-resource policy attached to a card/IMM in the following cases:
when the card/IMM state is unprovisioned
when the card/IMM is provisioned but not equipped
when the card/IMM is provisioned and equipped, but there is a mismatch between the two
Upon provisioning the card, subsequent to attaching a new system-resource policy, the parameters specified in the policy are used (including any boot-time parameters).
If the card is provisioned and equipped, and any boot-time parameter is changed in the system-resource policy, the user must issue the card reset command for all cards that are using the policy or reboot the chassis, for the policy change to take effect.