For 7210 SAS platforms that do not support any removable cards or MDAs (7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE), the card and MDA is auto-provisioned and operators can directly start with identifying and configuring the ports as follows.
On 7210 SAS chassis-based platforms, (7210 SAS-R6 and 7210 SAS-R12), the card type must be provisioned and operators need to start from identifying the chassis slot and configuration of the slot and card type, as shown below.
The most basic configuration must have the following:
identify chassis slot (if applicable)
specify line card type (must be an allowed card type).
identify MDA slot (if applicable)
specify MDA (must be an allowed MDA type) – if applicable
identify specific port to configure