The 7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE are platforms which have a set of fixed ports. Software preprovisions the cards on bootup. No expansion slots are supported on these platforms.
The show card command lists the cards auto-provisioned on 7210 SAS-T, 7210 SAS-Mxp, and 7210 SAS-Sx/S 1/10GE chassis.
The following show card sample output lists the cards auto-provisioned on 7210 SAS-T chassis.
A:7210SAST>show# card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 iom-sas up up
A sfm-sas up up/active
===============================================================================
A:7210SAST>show#
The following show card sample output lists the cards auto-provisioned on 7210 SAS-Mxp chassis.
*A:sim_dutc>show# card state
===============================================================================
Card State
===============================================================================
Slot/ Provisioned Type Admin Operational Num Num Comments
Id Equipped Type (if different) State State Ports MDA
-------------------------------------------------------------------------------
1 iom-sas up up 2
1/1 m22-sfp+2-tx+4-sfpp up up 24
A sfm-sas up up Active
===============================================================================
*A:sim_dutc>show#
The following show card sample output lists the cards auto-provisioned on 7210 SAS-Sx/S 1/10GE 48-port 1GE variant chassis.
*A:7210SAS>show# card state
===============================================================================
Card State
===============================================================================
Slot/ Provisioned Type Admin Operational Num Num Comments
Id Equipped Type (if different) State State Ports MDA
-------------------------------------------------------------------------------
1 iom-sas up up 2
1/1 s48-t4-sfpp up up 52
A sfm-sas up up Active
===============================================================================
*A:7210SAS>show#
*A:VoyagerDCpemV2# show card state
===============================================================================
Card State
===============================================================================
Slot/ Provisioned Type Admin Operational Num Num Comments
Id Equipped Type (if different) State State Ports MDA
-------------------------------------------------------------------------------
1 iom-sas up up 1
1/1 s64-sfpp+4-cfp up up 68
A sfm-sas up up Active
===============================================================================
*A:VoyagerDCpemV2#
The 7210 SAS-R6 is a chassis based platform with 6 IMM slots and 2 CPM slots. On a chassis based platform the slots must be provisioned. To preprovision a chassis slot, the line card type must be specified. System administrators or network operators can enter card type information for each slot, allowing a range of card types in particular slots. From the range of card types, a card and accompanying MDAs (if any) are specified. When a card is installed in a slot and enabled, the system verifies that the installed card type matches the allowed card type. If the parameters do not match, the card remains offline. A preprovisioned slot can remain empty without conflicting with populated slots. 7210 SAS-R6 supports only CPM and IMMs. It does not support any physical removable MDAs. Software uses logical MDAs internally to represent the ports on the IMMs and the MDA type is auto-provisioned by software when the IMMs are provisioned. Check the latest release notes for a list of supported card types (that is, CPM and IMMs). See the 7210 SAS-R6 Chassis Installation Guide for more information about installation of cards.
The 7210 SAS-R12 is a chassis based platform with 12 IMM slots and 2 CPM slots. On a chassis based platform the slots must be provisioned. To preprovision a chassis slot, the line card type must be specified. System administrators or network operators can enter card type information for each slot, allowing a range of card types in particular slots. From the range of card types, a card and accompanying MDAs (if any) are specified. When a card is installed in a slot and enabled, the system verifies that the installed card type matches the allowed card type. If the parameters do not match, the card remains offline. A preprovisioned slot can remain empty without conflicting with populated slots. 7210 SAS-R12 supports only CPM and IMMs. It does not support any physical removable MDAs. Software uses logical MDAs internally to represent the ports on the IMMs and the MDA type is auto-provisioned by software when the IMMs are provisioned. Please check the latest release notes for a list of supported card types (that is, CPM and IMMs). See 7210 SAS-R12 Chassis Installation Guide for more information about installation of cards.
On the 7210 SAS-R6 and 7210 SAS-R12, the user must preconfigure the type of IMMs that will be populated so that appropriate resources can be allocated on system bootup. See the config>system>chassis>allow-imm-family command in the 7210 SAS-Mxp, R6, R12, S, Sx, T Basic System Configuration Guide for more information.
The following show sample output lists the cards provisioned and equipped in the 7210 SAS-R6 and 7210 SAS-R12 chassis.
*A:sasr_dutb>show# card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 imm-sas-10sfp+1xfp up up
2 imm-sas-10sfp+1xfp up provisioned
(not equipped)
3 imm-sas-10sfp up up
4 (not provisioned) up unprovisioned
imm-sas-2xfp
5 imm-sas-2xfp up up
6 imm-sas-2xfp up up
A cpm-sf-sas-R6 up up/active
B cpm-sf-sas-R6 up up/standby
===============================================================================
*A:sasr_dutb>show#
A:A6144909484>show# card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
8 (not provisioned) up unprovisioned
imm-sas-b-4sfp+
A cpm-sf-sas-R12 up up/active
B cpm-sf-sas-R12 up up/standby