Debug commands

lag

Syntax

lag [lag-id lag-id [port port-id]] [all]

lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc] [mc-pkt]

no lag [lag-id lag-id]

Context

debug

Platforms

Supported on all 7210 SAS platforms as described in this document.

Description

This command enables debugging for LAG.

Parameters

lag-id lag-id: Specifies the link aggregation group ID.

port-id port-id: Specifies the physical port ID.

sm: Specifies to display trace LACP state machine.

pkt: Specifies to display trace LACP packets.

cfg: Specifies to display trace LAG configuration.

red: Specifies to display trace LAG high availability.

iom-upd: Specifies to display trace LAG IOM updates.

port-state: Specifies to display trace LAG port state transitions.

timers: Specifies to display trace LAG timers.

sel-logic: Specifies to display trace LACP selection logic.

mc: Specifies to display multi-chassis parameters.

mc-pkt: Specifies to display the MC-LAG control packets with valid authentication were received on this system.