redundancy
config
Supported on all 7210 SAS platforms as described in this document.
Commands in this context configure redundancy operations.
multi-chassis
config>redundancy
Supported on all 7210 SAS platforms as described in this document.
Commands in this context configure multi-chassis parameters.
[no] peer ip-address create
config>redundancy>multi-chassis
Supported on all 7210 SAS platforms as described in this document.
This command configures the MC-LAG peer.
This command only applies for mc-lag (20), not for mc-sync (4).
Specifies the IP address.
Specifies to create the peer.
authentication-key [authentication-key | hash-key] [hash | hash2]
no authentication-key
config>redundancy>multi-chassis>peer
Supported on all 7210 SAS platforms as described in this document.
This command configures the authentication key used between this node and the multi-chassis peer. The authentication key can be any combination of letters or numbers.
Specifies the authentication key. Allowed values are any string up to 20 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Specifies the hash key. The key can be any combination of ASCII characters up to 33 (hash1-key) or 55 (hash2-key) characters (encrypted). If spaces are used in the string, enclose the entire string in quotation marks.
Specifies that the key is entered in an encrypted form. If the hash or hash2 parameter is not used, the key is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted form in the configuration file with the hash or hash2 parameter specified.
Specifies that the key is entered in a more complex encrypted form that involves more variables then the key value alone, this means that the hash2 encrypted variable cannot be copied and pasted. If the hash or hash2 parameter is not used, the key is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted form in the configuration file with the hash or hash2 parameter specified.