fec-egress-statistics [ip-prefix/mask]
clear>router>ldp
Supported on all 7210 SAS platforms as described in this document.
This command resets or clears LDP FEC egress statistics.
Specifies information for the specified IP prefix and mask length. Host bits must be "0".
Specifies the 32-bit address mask used to indicate the bits of an IP address that are being used for the subnet address.
interface ip-int-name
clear>router>mpls
Supported on all 7210 SAS platforms as described in this document.
This command resets or clears statistics for MPLS interfaces.
Specifies the name of an existing IP interface. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
lsp lsp-name
clear>router>mpls
Supported on all 7210 SAS platforms as described in this document.
This command resets and restarts an LSP.
Specifies the name of the LSP to clear, up to 64 characters.
interface ip-int-name statistics
clear>router>rsvp
Supported on all 7210 SAS platforms as described in this document.
This command resets or clears statistics for an RSVP interface.
Specifies the name of the IP interface to clear. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Keyword to clear only statistics.
statistics
clear>router>rsvp
Supported on all 7210 SAS platforms as described in this document.
This command clears global statistics for the RSVP instance, for example, clears path and resv timeout counters.