mpls [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id]
no mpls
debug>router
Supported on all 7210 SAS platforms as described in this document.
This command enables and configures debugging for MPLS.
Specifies the name that identifies the LSP, up to 32 characters.
Specifies the system IP address of the sender.
Specifies the far-end system IP address.
Specifies the MPLS SDP ID.
Specifies the LSP ID.
[no] event
debug>router>mpls
debug>router>rsvp
Supported on all 7210 SAS platforms as described in this document.
This command enables debugging for specific events.
The no form of this command disables the debugging.
all [detail]
no all
debug>router>mpls>event
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs all events.
The no form of this command disables the debugging.
Keyword to display detailed information about all events.
auth
no auth
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs authentication events.
The no form of this command disables the debugging.
Keyword to display detailed information about authentication events.
frr [detail]
no frr
debug>router>mpls>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs fast re-route events.
The no form of this command disables the debugging.
Keyword to display detailed information about re-route events.
iom [detail]
no iom
debug>router>mpls>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs MPLS IOM events.
The no form of this command disables the debugging.
Keyword to display detailed information about MPLS IOM events.
lsp-setup [detail]
no lsp-setup
debug>router>mpls>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs LSP setup events.
The no form of this command disables the debugging.
Keyword to display detailed information about LSP setup events.
mbb [detail]
no mbb
debug>router>mpls>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs the state of the most recent invocation of the make-before-break (MBB) functionality.
The no form of this command disables the debugging.
Keyword to display detailed information about MBB events.
misc [detail]
no misc
debug>router>mpls>event
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs miscellaneous events.
The no form of this command disables the debugging.
Keyword to display detailed information about miscellaneous events.
xc [detail]
no xc
debug>router>mpls>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs cross connect events.
The no form of this command disables the debugging.
Keyword to display detailed information about cross connect events.
[lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
no rsvp
debug>router
Supported on all 7210 SAS platforms as described in this document.
This command enables and configures debugging for RSVP.
Specifies the name that identifies the LSP, up to 32 characters.
Displays the system IP address of the sender.
Displays the far-end system IP address.
Displays the RSVP tunnel ID.
Displays the LSP ID.
Displays the interface name. The interface name can be up to 32 characters long and must be unique. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
nbr [detail]
no nbr
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs neighbor events.
The no form of this command disables the debugging.
Keyword to display detailed information about neighbor events.
path [detail]
no path
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs path-related events.
The no form of this command disables the debugging.
Keyword to display detailed information about path-related events.
resv [detail]
no resv
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs RSVP reservation events.
The no form of this command disables the debugging.
Keyword to display detailed information about RSVP reservation events.
rr
no rr
debug>router>rsvp>event
Supported on all 7210 SAS platforms as described in this document.
This command debugs refresh reduction events.
The no form of this command disables the debugging.
Keyword to display detailed information about refresh reduction events.
[no] packet
debug>router>rsvp>
Supported on all 7210 SAS platforms as described in this document.
This command enable the context to debug packets.
ack [detail]
no ack
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs ACK packets.
The no form of this command disables the debugging.
Keyword to display detailed information about RSVP-TE ACK packets.
bundle [detail]
no bundle
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs bundle packets.
The no form of this command disables the debugging.
Keyword to display detailed information about RSVP-TE bundle packets.
all [detail]
no all
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs all packets.
The no form of this command disables the debugging.
Keyword to display detailed information about all RSVP packets.
hello [detail]
no hello
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs hello packets.
The no form of this command disables the debugging.
Keyword to display detailed information about hello packets.
path [detail]
no path
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command enables debugging for RSVP path packets.
The no form of this command disables the debugging.
Keyword to display detailed information about path-related events.
patherr [detail]
no patherr
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs path error packets.
The no form of this command disables the debugging.
Keyword to display detailed information about path error packets.
pathtear [detail]
no pathtear
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs path tear packets.
The no form of this command disables the debugging.
Keyword to display detailed information about path tear packets.
resv [detail]
no resv
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command enables debugging for RSVP resv packets.
The no form of this command disables the debugging.
Keyword to display detailed information about RSVP Resv events.
resverr [detail]
no resverr
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs ResvErr packets.
The no form of this command disables the debugging.
Keyword to display detailed information about ResvErr packets.
resvtear [detail]
no resvtear
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs ResvTear packets.
The no form of this command disables the debugging.
Keyword to display detailed information about ResvTear packets.
srefresh [detail]
no srefresh
debug>router>rsvp>packet
Supported on all 7210 SAS platforms as described in this document.
This command debugs srefresh packets.
The no form of this command disables the debugging.
Keyword to display detailed information about RSVP-TE srefresh packets.