MPLS-TP commands are only supported on 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-T (network mode).
config
- router
- [no] mpls
- [no] mpls-tp
- global-id global-id
- no global-id
- node-id node-id
- no node-id
- [no] oam-template name
- bfd-template name
- no bfd-template
- hold-time-down timer
- no hold-time-down
- hold-time-up timer
- no hold-time-up
- protection-template name
- no protection-template
- rapid-psc-timer interval
- no rapid-psc-timer
- [no] revertive
- slow-psc-timer interval
- no slow-psc-timer
- wait-to-restore interval
- no wait-to-restore
- [no] shutdown
- tp-tunnel-id-range start-id end-id
- no tp-tunnel-id-range
- transit-path path-name
- no transit-path
- [no] forward-path in-label out-label out-label out-link interface name [next-hop ip-address]
- in-label in-label out-label out-label out-link if-name [next-hop next-hop]
- path-id {lsp-num lsp-num | working-path | protect-path [src-global-id src-global-id] src-node-id src-node-id src-tunnel-num src-tunnel-num [dest-global-id dest-global-id] dest-node-id dest-node-id [dest-tunnel-num dest-tunnel-num]}
- no path-id
- [no] reverse-path in-label out-label out-label out-link interface name [next-hop ip-address]
- in-label in-label out-label out-label out-link if-name [next-hop next-hop]
- [no] shutdown